Under-Bed Storage: Removing Drawers for Space
Many RVers find the factory-installed drawers under the bed are either flimsy or inaccessible. If you are considering removing them to open up bulk storage, proceed with caution.
Always check for hidden wiring, plumbing lines, or structural supports before unbolting the track systems. Removing these drawers often requires building a platform or reinforcement to support the bed frame, as the drawer assembly often acts as a weight-bearing structure.
Leveling and Storage Wisdom
Parking on Raised Blocks
Parking on raised blocks is standard, but the material matters. Avoid using stacked bricks or non-rated wood, as these can crack or shift under the weight of a heavy rig. Always use UV-rated plastic leveling blocks or dedicated rubber pads designed for long-term pressure.
Correct Use of Anderson Levelers
We have all seen it at the storage facility: Anderson levelers installed backward or used without the necessary chock. To use them correctly, ensure the leveler is placed so the tire drives up the ramp and the crescent-shaped chock is locked securely under the edge. Improper placement puts immense stress on the tire sidewalls and can cause the rig to roll.
Protecting Your Tires During Storage
Tires are often the most neglected component of a parked RV. Prolonged exposure to UV light and uneven ground contact can lead to premature dry rot and belt separation.
- Use tire covers to shield against UV radiation.
- Park on a hard surface or use leveling pads to prevent the rubber from sinking into soil or gravel.
- Inflate tires to the maximum PSI recommended on the sidewall if the RV will sit for more than a month.
Keep Your Rig Ready for the Road
Whether you are prepping for a stay at [Hidden Valley RV Park](/park/hidden-valley-rv-park) or planning a trip near [Pine Ridge Campground](/park/pine-ridge-campground), consistency is key. Maintenance isn't just about repairs; it is about preventative care that keeps you safe and on schedule.
